Come eseguire la manutenzione dei serramenti?
Generally speaking, exterior frames do not require special maintenance of any kind. To keep them in proper working order and looking their best, simply follow the advice given below:
- Clean wooden parts of exterior doors and windows with mild detergents or soapy water only; under no circumstances use acid-, alcohol- or ammonia-based cleaners.
- You can clean glass with normal commercially available cleaners, but be careful not to get them on the silicone or varnish; never use abrasive products (wire scouring pads and the like).
- Lubrication results in less hardware friction and reduces oxidation on all moving parts (hinges, locks, fittings, etc.), which need lubricating a couple of times a year with mineral oil.
Come mai durante la pulitura dei miei serramenti, lo straccio si colora leggermente?
If you see colour coming off onto the rag while carrying out routine maintenance on the door or window frame, there's absolutely no need to worry. The resins used in the formulation of the water-based varnish are acrylic and feature elastic properties to make them more weather resistant. What this elasticity also does is make the water-based varnish slightly thermoplastic, which means it softens when exposed to heat. The action of rubbing generates heat on the surface, causing the varnish to soften and thus making the pigments easy to remove from the frame coating since they're found on the surface of the film and not just inside the varnish. As the layer of removed varnish is infinitesimally small, you won't see any reduction in the protection from weathering provided by the varnish. You'll find that less and less colour comes off once you've cleaned the frames a few times.
Come mai si presentano della variazioni cromatiche nel mio serramento?
Once a window or door frame with a clear varnish (e.g. 0 gloss natural effect) is exposed to the outdoors, it undergoes a change in colour to a varying degree. Wood is made up of cellulose, lignin and a variety of other chemical compounds, which can all be broken down by the ultraviolet component of sunlight. Over time, the harsh effects of sunlight on woodwork varnished with clear finishes (i.e. finishes that let the wood show through) result in a slight change to the colour of the actual wood. This change depends on:
- the level of exposure to sunlight
- the type of wood
- the colour of the preservative
Exposure to sunlight: window and door frames fitted flush with the outside wall or without any external shelter (e.g. porch, etc.) or facing south-west (in the case of the northern hemisphere) or installed in hot countries (e.g. Greece, Middle East, Spain, Portugal, etc.) will experience more noticeable changes in colour due to their greater exposure to solar radiation. Type of wood: wood can be split into two categories:
- Non-tannic wood (e.g. Meranti): wood exposed to sunlight tends to go yellow or darken due to the products that form as a result of the lignin in the wood cells being broken down.
- Tannic wood (e.g. Oak, Teak): wood exposed to sunlight tends to discolour as the compounds contained in the wood cell - which are what give the species its colour - begin to break down. This colour change is more noticeable where the wood features a deeper coloured grain (e.g. Teak) since the grain's natural substances are more prone to being broken down by sunlight.
Colour of the preservative: in the case of colourless preservatives, the change in the colour of the wood is considerable and can be seen after just a few months of exposure. This change will be far less noticeable when using darker tinted preservatives. This is because the clear iron oxides used to tint the preservative have a special property that allows them to absorb the UV component of solar radiation. Moreover, since iron oxides offer excellent heat resistance and are exceptionally UV stable, they provide the wood with better long-term protection.
If your windows and doors have a clear finish and are highly exposed and/or installed in a hot country, at least once every six months you can use a rag to apply the mild water-based detergent T.CLEAN RIO VERDE RR1050 followed by the water-based wood reviver T.TOP+ RIO VERDE RR1250
Come mai si formano delle chiazze biancastre?
The film left on the wood by water-based varnishes, unlike their traditional solvent-based counterparts, is more sensitive to water, whether it comes in the shape of rain or vapour. This phenomenon is inherently linked to the very nature of these water-based varnishes. Consequently, you may find that clear whitish patches form when rain falls on the film of varnish before it has dried completely. The binder component of water-based varnishes consists of acrylic resin particles dispersed in an aqueous emulsion, which is produced using surfactants or emulsifiers. The latter chemical substances are made up of a hydrophobic part (which bonds with the acrylic resin given that it is not water soluble) and a hydrophilic part (which bonds with the water). Even when the film of varnish has dried, the surfactants stay inside the film until they have been washed away completely by rainwater. When surfactants locked inside the film of varnish come into contact with rainwater and/or moisture condensing at night, they generate clear whitish patches that disappear as soon as they are no longer affected by water (once it has evaporated). These patches can be attributed to the solubility of the surfactant inside the film. If the film comes into contact with water on subsequent occasions, each episode will be less pronounced than the last, to the point where it disappears altogether once all the surfactant has been washed away.
Do nothing, just leave the frames to dry naturally. It's very important you don't scratch at the whitish patch since the film has not hardened fully at this stage and could be damaged irreparably in this partly softened state. You can wipe off water with a soft cloth without damaging the varnish. This phenomenon will become less noticeable as time goes by and, in time, will simply cease to occur. Consequently, you don't have to take any kind of action. However, if you want to do something to remedy the situation anyway, you can always proceed as follows once the whitish patches have disappeared and the frame is completely dry:
- If dealing with fairly significant whitish patches: use a rag to apply the water-based wood reviver T.TOP+ RIO VERDE RR1250, regardless of the tint or colour of the frame
Come mai gli scuri esterni a doghe si sono leggermente rigonfiati dopo un periodo di umidità?
Wood is a hygroscopic material, which means it is prone to absorbing moisture from the air and releasing it back depending on what the weather is doing. As a result, it is natural for wood to experience a certain amount of movement, even once it has been varnished, dictated by this absorption or release of moisture. The way slatted shutters are constructed means they are the products most likely to be affected by this particular property of wood. After extensive periods of high atmospheric humidity levels (e.g. foggy weather) or persistent rain or snow, shutters can actually swell on the outside, causing them to lose their shape and become difficult to open and close.
As soon as atmospheric humidity has returned to normal - provided the high levels have not lasted for too long (more than 7 days) - shutters will return to more or less their original size. So do not shave down the shutter with a plane. After the first two or three swelling episodes caused by atmospheric humidity, the wood stabilizes, meaning it becomes much less of a problem. If atmospheric humidity levels remain high for an extended period of time (longer than 15 days), the swelling, beyond a certain limit, will not go away altogether. In this case, the first thing to do is adjust the hardware and then, if this is not enough, the sides will need shaving down. The wood exposed as a result will need revarnishing.
Panto windows in line with its own traditions is preparing to launch a revolutionary window by changing the form, construction and design. Absolut is born, the window glazing flush with the wall built without the installation of glazing beads. The...LEGGIARTICOLO